Electret Microphone Preamplifier 1 Transistor | Audio Circuits

Saturday, June 2, 2012

Electret Microphone Preamplifier 1 Transistor

This is a simple microphone preamplifier circuit which you can use between your microphone and stereo amplifier. This circuit amplifier microphone suitable for use with normal home stereo amplifier line/CD/aux/tape inputs. This microphone preamplifier can take both dynamic and electret microphone inputs. The performance of the circuit is nothing superior but can be used with many not so serious projects.
Rangkaian Electret Microphone Preamplifier 1 Transistor
The circuit is a simple 1 transistor amplifier with amplification of about 30-40 dB. The dynamic mic input is just a simple one transistor amplifier circuit with nothing special in it. LED D1 is in the circuit to show that the circuit operates. The voltage drop caused by LED (around 1.8V for RED led) has been taten in account when designing the amplifier circuit built around Q1. Resistor R4 and capacitor C5 make a filter to filter out possible noise from battery or other power source which is used to feed this circuit. Capacitors C1, C2 and C3 are used to block the DC bias on Q1 base to flow out of microphone input to microphone.

This  Microphone Preamplifier Circuit From http://www.tkk.fi/

No comments:

Post a Comment