Audio Gambar Skema Rangkaian Subwoofer Filter Mobil | Audio Circuits

Monday, October 17, 2011

Audio Gambar Skema Rangkaian Subwoofer Filter Mobil

Gambar Skema Rangkaian Subwoofer Filter MobilGambar Skema Rangkaian Subwoofer Filter Mobil

The circuit is designed around the TL072 dual BIFET opamp IC. Out of the two opamps inside the chip, IC1A is wired as a buffer. The left & right audio inputs after mixing is fed to the input of the IC1A using the DPDT switch S1. Switch S1 is the phase control switch which can be used to make the subwoofer in phase with other speakers. When S1 is in position 2, 180 degree phase shift will be induced.POT R7 can be used for controlling the level. IC1B forms the low pass filter whose pass frequency can be controlled by adjusting the dual gang POT R13.

Here is the circuit diagram of a simple subwoofer filter that can be operated from a 12V DC supply. Such a circuit is useful in automobile subwoofer applications. The circuit is nothing but a low pass filter whose pass frequency can be adjusted between 60 to 160 Hz.

No comments:

Post a Comment